Troubleshooting Tips for New Monitors
# The picture does not appear

* Check to make sure the signal cable is firmly connected in the socket.
* Check to see if the computer system's power is ON.
* Check that the Brightness Control is at the appropriate position, not at the minimum.

# The Screen is not synchronized

* Check to make sure the signal cable is firmly connected in the socket.
* Check that the output level matches the input level of your computer.
* Make sure the signal timing of the computer system is within the specification of the monitor.

# The position of the screen is not in the center

* Adjust the H-Size, H-Phase or V-Size, V-Center controls.
* Check if the signal timing of the computer system is within the specification of the monitor.

# The screen is too bright or too dark

* Check if the Brightness or contrast control is at the appropriate position, not at the maximum or minimum.
* Check if the specified voltage is applied
* Check if the signal timing of the computer system is within the specification of the monitor.
* Especially, check the horizontal frequency.

# The screen is shaking

* Move all objects that emit a magnetic field, such as a motor or transformer, away from the monitor.
* Check if the specified voltage is applied.
* Check if the signal timing of the computer system is within the specification of the monitor.

__________________
Shaalini.S
Be the Best of Whatever you are...