WINDOWS XP SYSTEM SHUTDOWN WORKS, BUT IT’S REAL SLOW

If it appears that Win XP is not shutting down, give it some time. Some users have reported a minute or longer for shutdown to visibly start. Thus far, it appears that this is a consequence of software that is running when shutdown is attempted, and it also may have something to do with particular hardware. If you are experiencing this problem, be sure to close all running programs before attempting shutdown and see if this solves your problem. If so, then you can determine, by trial and error, which program(s) are involved.

One specific solution for this was provided by Microsoft support. ” In Control Panel | Administrative Tools | Services. (You can also get this by launching SERVICES.MSC from a Run box. This utility is also built into the Computer Management console.) Stop the Nvidia Driver Helper service. Many other friends quickly confirmed that this solved this “extremely slow shutdown” problem for them

__________________
A.Rajesh Khanna

WINDOWS XP SYSTEM POWERDOWN ISSUES.

“Powerdown issues” are quite distinctive from “shutdown issues.” I define a shutdown problem as one wherein Windows doesn’t make it at least to the “OK to shut off your computer” screen. If Windows gets that far, or farther, then it has shut down correctly. However, the computer may not powerdown correctly after that. This is a different problem, and I encourage that people reporting these issues to make a very clear distinction in their labeling.

When Windows XP won’t powerdown automatically, the APM/NT Legacy Power Node may not be enabled. To enable this, right-click on the My Computer icon, click Properties | Hardware | Device Manager | View. Check the box labeled “Show Hidden Devices.” If it’s available on your computer, there will be a red X on the APM/NT Legacy Node. Try enabling it and see if this resolves the powerdown problem.

This should resolve the powerdown issue in most cases. However, other factors can sometimes interfere with correct powerdown functioning. In that case, consider the following tips:

1. If you are changing the default power settings in the BIOS, it can lead to a powerdown problem. Restoring all BIOS power settings to default will likely fix it.

__________________
A.Rajesh Khanna

WINDOWS XP OTHER KNOWN ISSUES & HINTS

BIOS UPGRADE

As with every new operating system that comes along - especially one that is as much of a “step up” as Windows XP is from Windows 9x - the recommendation is made to be sure your BIOS is updated. Many people have reported that this has solved their shutdown problems (and had other advantages) with Win XP, just as it has in earlier versions of Windows.

__________________
A.Rajesh Khanna

Speed up your Windows 2000/XP system and save resources at the same time

You can improve performance of your Windows 2000/XP and reclaim memory by simply disabling the services that is also known as "System Services" you don't need which Windows 2000 or XP automatically provide by default.

What Are System Services in the 1st place

System services are actually small helper programs that provide support for other larger programs in Windows 2000. Many of the services are set up to run automatically each time you start Windows 2000. However, if you're not using the larger programs that these services are designed to support, these services are simply wasting RAM that could be put to better use by your applications. While the word "Disable" is used here to describe the idea that you'll remove these services from memory, what you'll really be doing is changing the startup setting from Automatic to Manual. When you do, the services won't automatically start each time you launch Windows 2000 Professional. However, Windows 2000 will be able to manually start the services if they're needed. That way you won't be unnecessarily wasting RAM, but you won't be crippling your system either. Note: If you're running Windows 2000 Professional on a corporate network, you may not be able to adjust system services. Regardless of whether you can or not, you should check with your system administrator before attempting the make these changes.

Changing the startup type of a service from Automatic to Manual is a relatively simple operation. To begin, open the Control Panel, open the Administrative Tools folder, and then double click the Services tool. When you see the Services window, set the View to Detail if it isn't already. Then click the Startup Type column header to sort the services by Startup Type. When you do, all the Services that start automatically will appear at the top of the list.

As you scan through the list of services on your system whose Startup Type setting is set to Automatic, look for the services in listed in the Table below. These are some of the services are good candidates to be set to a Manual Startup Type.

Examples of services that can be safely changed to Manual :-

DHCP Client -- You're not connecting to a specific DHCP server on your local network

Distributed Link Tracking Client -- You're not connected to a Windows 2000 domain

DNS Client -- You're not connecting to a specific DNS server on your local network

FTP Publishing Service -- You don't need your system to act as an FTP server

IIS Admin Service -- You don't need your system to act as an WWW server

IPSEC Policy Agent -- You're not connected to a Windows 2000 domain

Messenger -- You're not connected to a Windows 2000 domain

Remote Registry Service -- You don't remotely access the Registry of other systems on your local network

RIP Service -- You don't need your system to act as a router

Run As Service -- You don't use any applications that run as an alias

__________________
A.Rajesh Khanna

World Wide Web Publishing Service

You don't need your system to act as an WWW server If you find a match and think that your system doesn't need that particular service, right-click on the service and choose the Properties command from the shortcut menu. When you see the Properties dialog box for that service, click the Startup Type drop down list and select Manual. Then click OK. As you change the Startup Type for any service, take note of the service's name. That way you'll have a record of which services you changed and can change them back if you need to, as I'll explain in a moment.

__________________
A.Rajesh Khanna

Speed up your Windows 2000/XP system and save resources at the same time




Trick : To determine the amount of RAM you'll regain by disabling unnecessary system services, use the Windows Task Manager. Here's how: Before you disable any system services, reboot your system and don't launch any applications. If you have applications that automatically load when you start Windows, hold down the [Shift] key to bypass the Startup folder. Then, right click on the task bar and select Task Manager from the shortcut menu. When you see the Windows Task Manager dialog box, select the Performance tab. Now take note of the Available value in the Physical Memory panel. After you disable those system services you deem unnecessary, reboot your system in the same manner and compare the Available value in the Physical Memory panel to the one that you noted earlier.

__________________
A.Rajesh Khanna

Speed up your Windows 2000/XP system and save resources at the same time



Final thoughts

Keep in mind that you may not find all the services listed in the Table set to Automatic on your system. In fact, you might not even see some of the services listed present on your system. If that's the case, don't worry about it. Each Windows 2000/XP installation is unique depending on the system and installed software, and different sets of services may be installed and set to start automatically.

On the other hand, you may find services other than those listed in Table set to Automatic that you may think are unnecessary. If so, you can find out what each service does by hovering your mouse pointer over the service's description. When you do, a tool tip window will pop up and display the entire description of the service. You can then better determine if the service is unnecessary. Remember, by changing the Startup Type to Manual, Windows 2000 can still start the service if it's needed. If you decide to experiment with changing the Startup Types of certain services, you can monitor the services over time by launching the Services utility and checking the list of running services. If you consistently find one of the services you set to Manual running, you may decide to change the Startup Type back to Automatic.

__________________
A.Rajesh Khanna

Use Windows Update to Keep Your Computer Current

Windows XP takes the chore out of keeping your software updated with the newest and best code for device drivers, security, reliability, and performance.

Windows Update is the online extension of Windows. It’s a Web site where you find the most recent updates for your operating system, software programs, and hardware. Windows Update scans your computer and lists the code updates needed on your system. Then you can choose whether to download and install them.

__________________
A.Rajesh Khanna

To find available updates

1. Open Windows Update.

2. Click Scan for updates to find out about recent releases for your system.

3. Click Yes when prompted to install any required software or device drivers.

Notes:

To open Windows Update, click Start, then click Help and Support. Under “Pick a task,” click Keep your computer up–to–date with Windows Update.

The first time you go to the Windows Update Web site, click Yes when prompted to install any required software or controls.

To use Windows Update, you need to establish a connection to the Internet.

You might need to be logged on as an administrator or a member of the Administrators group in order to perform some tasks.

__________________
A.Rajesh Khanna

Use Virtual Private Networks for Secure Internet Data Transfer

Data sent across the public Internet is generally not protected from prying eyes, but you can make your Internet communications secure and extend your private network with a virtual private network (VPN) connection. VPN uses a technique known as tunneling to transfer data securely on the Internet to a remote access server on your workplace network. Using a VPN helps you save money by using the public Internet instead of making long–distance phone calls to connect securely with your private network.

The connection over the Internet is encrypted and secure. New authentication and encryption protocols are enforced by the remote access server. Sensitive data is hidden from the public, but it is securely accessible to appropriate users through a VPN.

There are two ways to create a VPN connection: By dialing an Internet service provider (ISP), or by connecting directly to the Internet.

If you dial–in to an ISP, your ISP then makes another call to the private network’s remote access server to establish the PPTP or L2TP tunnel. After authentication, you can access the private network.

If you are already connected to the Internet, on a local area network, a cable modem, or a digital subscriber line (DSL), you can make a tunnel through the Internet and connects directly to the remote access server. After authentication, you can access the corporate network.

__________________
A.Rajesh Khanna

To make a virtual private network (VPN) connection

Open Network Connections. (Click Start, click Control Panel, click Network and Internet Connections, and then click Network Connections.)

Under Network Tasks, click Create a new connection, and then click Next.

Click Connect to the network at my workplace, and then click Next as shown below.

Click Virtual Private Network connection, click Next, and then follow the instructions in the wizard.

__________________
A.Rajesh Khanna

Unlocking WinXP's setupp.ini

WinXP's setupp.ini controls how the CD acts. IE is it an OEM version or retail? First, find your setupp.ini file in the i386 directory on your WinXP CD. Open it up, it'll look something like this:

ExtraData=707A667567736F696F697911AE7E05

Pid=55034000

The Pid value is what we're interested in. What's there now looks like a standard default. There are special numbers that determine if it's a retail, oem, or volume license edition. First, we break down that number into two parts. The first five digits determines how the CD will behave, ie is it a retail cd that lets you clean install or upgrade, or an oem cd that only lets you perform a clean install? The last three digits determines what CD key it will accept. You are able to mix and match these values. For example you could make a WinXP cd that acted like a retail cd, yet accepted OEM keys.

Now, for the actual values. Remember the first and last values are interchangable, but usually you'd keep them as a pair:

Retail = 51882335
Volume License = 51883 270
OEM = 82503 OEM

So if you wanted a retail CD that took retail keys, the last line of your setupp.ini file would read:

Pid=51882335

And if you wanted a retail CD that took OEM keys, you'd use:

Pid=51882OEM

Note that this does NOT get rid of WinXP's activation. Changing the Pid to a Volume License will not bypass activation. You must have a volume license (corporate) key to do so.

__________________
A.Rajesh Khanna

Ping

In a previous tip, it was revealed how to continuously ping a host until stopped. Here are all of the ping options:

example .. In DOS .. c:>ping 192.168.0.1 -t

-t Ping the specifed host until interrupted

-a Resolve addresses to hostnames

-n count Number of echo requests to send

-l size Send buffer size

-f Set Don't Fragment flag in packet

-i TTL Time To Live

-v TOS Type Of Service

-r count Record route for count hops

-s count Timestamp for count hops

-j host-list Loose source route along host-list

-k host-list Strict source route along host-list

-w timeout Timeout in milliseconds to wait for each reply

__________________
A.Rajesh Khanna

Use System Restore to Undo Changes if Problems Occur

Windows XP Professional makes it easier to resolve problems if they occur in your system. You can use System Restore to remove any system changes that were made since the last time you remember your computer working correctly. System Restore does not affect your personal data files (such as Microsoft Word documents, browsing history, drawings, favorites, or e–mail) so you won’t lose changes made to these files. Windows XP creates “restore points” every day, as well as at the time of significant system events (such as when an application or driver is installed). You can also create and name your own restore points at any time. Creating a restore point can be useful any time you anticipate making changes to your computer that are risky or might make your computer unstable. If something goes wrong, you select a restore point and Windows XP undoes any system changes made since that time.

When you run System Restore, a calendar is displayed to help you find restore points. If you don't use your computer every day, some days might not have any restore points. If you use your computer frequently, you might have restore points almost every day, and some days might have several restore points.

__________________
A.Rajesh Khanna

To create a System Restore Point

1. Access the System Restore Wizard through Help and Support Center. (Click Start, and then click Help and Support. Click Performance and Maintenance, click Using System Restore to undo changes, and then click Run the System Restore Wizard.

2. Click Create a restore point, and then click Next.

3. In the Restore point description box, type a name to identify this restore point. System Restore automatically adds to this name the date and time that this Restore Point is created.

To finish creating this restore point, click Create.

To cancel restore point creation and return to the Welcome to System Restore screen, click Back.

To cancel restore point creation and exit the System Restore Wizard, click Cancel

To view or to return to this restore point, from the Welcome to System Restore screen of the System Restore Wizard select Restore my computer to an earlier time. Then select the date when the restore point was created from the calendar in the Select a Restore Point screen. All of the restore points that were created on the selected date are listed by name in the list box to the right of the calendar.

__________________
A.Rajesh Khanna

To set advanced System restore options

1. Open Backup. (Click Start, point to All Programs, point to Accessories, point to System Tools, and then click Backup.) The Backup Utility Wizard starts by default, unless it is disabled.

2. Click the Advanced Mode button in the Backup Utility Wizard.

3. Click the Restore and Manage Media menu and select the files to restore.

4. Click the Start Restore button.

5. On the Confirm Restore dialog box, click Advanced.

6. Set the advanced restore options you want, and then click OK. See the Notes section for a description of each option.

__________________
A.Rajesh Khanna

Use PostScript Type 1 fonts in XP


You don't need Adobe Type Manager to use PostScript Type 1 fonts under Windows XP.

Just drag the Type 1 font files to your fonts folder; XP automatically installs and activates the font. This works for TrueType and OpenType fonts, too

__________________
A.Rajesh Khanna

Make XP display a custom screen saver using your very own pictures




It used to be darn near impossible to create a personal screen saver using your own photo collection. To do this, you had to track down a third-party application and sloppily piece together your pictures to create a screen saver.


Well, the engineers at Microsoft must have realized they hated third-party applications and decided enough was enough. XP can take any pictures stored in your "My Pictures" folder and display them in random order as a screen saver.


To make a personal screen saver in XP, follow these directions:

Right-click an empty spot on your desktop and choose Properties.
Click the Screen Saver tab inside the Display Properties dialog box.
In the Screen Saver pull-down menu, choose "My Pictures Slideshow."
Underneath the Screen Saver pull-down menu, adjust the time of inactivity before Windows will initiate your screen saver.
Click Settings to make additional adjustments. You'll be able to adjust transition effects between pictures, how frequently they change, what size the pictures should be, and more.
Click OK when you're done tweaking the settings adjustments.
Press the Preview button to see what your screen saver looks like.
If everything is to your liking, click Apply.

__________________
A.Rajesh Khanna

If you plan on getting a copy of XP, one of the first things you're going to do is set up a user account. Why not give your user account its very own picture? It's OK if you don't want to use a picture of your own because Windows comes with at least 20 beautiful pictures to choose from.

Here's how you can customize your user account icon.

Single-click the start menu and choose Control Panel.
Single-click the User Accounts icon.
Find the user account you'd like to change the icon for and click on it.
Click the text that says "Change My Picture."
You'll have the option to either pick one of the predefined icons or choose your own.
If you like one of the predefined icons, just highlight the one you like and click the button labeled "Change Picture."
If you'd like to use your own picture, just click the magnifying glass or the text labeled "Browse for more pictures." This will launch a dialog box directing you to navigate to where your new picture is stored. After you find it, just click Open to save your new changes.

__________________
A.Rajesh Khanna

Symmetric multiprocessing (SMP) is a technology that allows a computer to use more than one processor. The most common configuration of an SMP computer is one that uses two processors. The two processors are used to complete your computing tasks faster than a single processor. (Two processors aren't necessarily twice as fast as a single processor, though.)

In order for a computer to take advantage of a multiprocessor setup, the software must be written for use with an SMP system. If a program isn't written for SMP, it won't take advantage of SMP. Not every program is written for SMP; SMP applications, such as image-editing programs, video-editing suites, and databases, tend to be processor intensive.

SMP in Windows XP

Operating systems also need to be written for SMP in order to use multiple processors. In the Windows XP family, only XP Professional supports SMP; XP Home does not. If you're a consumer with a dual-processor PC at home, you have to buy XP Professional. Windows XP Advanced Server also supports SMP.

In Microsoft's grand scheme, XP Professional is meant to replace Windows 2000, which supports SMP. In fact, XP Professional uses the same kernel as Windows 2000. XP Home is designed to replace Windows Me as the consumer OS, and Windows Me does not support SMP.

The difference between XP Professional and XP Home is more than just $100 and SMP support. XP Professional has plenty of other features not found in XP Home; some you'll use, others you won't care about. Get more information on the differences by reading this article.

__________________
A.Rajesh Khanna